jetcoat jetcoat Where To Buy Contact
Home About Us Products Brands Literature Sds & Data Sheets spacer
JETCOAT...the trusted name
Jetcoat Home Page Jetcoat Home Page Jetcoat Home Page
  Go Back To Products Page  



Farm Pride - Concrete Crack Sealant
100% Acrylic Elastomeric Sealant

  • Seals Out Moisture
  • Fills Cracks Up To 1/2” Wide
  • High Solids Formulation for Lasting Repair
  • Dries Nuetral - Sand

Sizes Available:
.9 Quart Bottle

Coverage is dependent upon depth and width of cracks. Typically, one quart of Concrete Crack Sealant will fill approximately 20-35 feet of cracks.

» sds (pdf) » Where to Buy
» Tech Data Sheet PDF Icon (pdf)  

A 100% acrylic elastomeric sealant designed for filling cracks up to 1/2” wide in concrete pavement surfaces.

Filling cracks in concrete pavement surfaces.

Clean Cracks - Remove dirt and vegetation from cracks with screwdriver, wire brush or other suitable instrument. Flush out crack with water and allow to dry.

Apply Concrete Crack Sealant - Mix contents of container by moderately shaking. Cut top of spout to desired width (smaller than width of crack). Fill cracks and smooth flush to adjoining pavement with putty knife. Allow crack sealant to dry for 24 hours. If desired, a second application may be applied. Allow Crack Sealant to cure 24 hours before resuming traffic.

Squeegee Application

Designed for filling cracks in concrete pavement surfaces.

Item Number
Unit Size Unit Weight Pack Pack Weight


.9 qt. Bottle 3.2 lbs.


39 lbs.

Tools Needed:

You May Also Need:
HoseGloves High Gloss Sealer
Concrete Sealer
Concrete Patch
Concrete Cleaner
Concrete Bonding Agent and Fortifier


Home Owner - DIY



Home | About Us | Products | Brands | Literature | Sds & Data Sheets | Where To Buy | Contact Us

All Content Copyright © JETCOAT 2008